SD10 SD12 QL80 large hole drilling DTH button bits
SPECIFICATION
Product type: Large hole DTH button bit
Diameter range: 254 mm to 660 mm (10 inch to 26 inch)
10 inch shanks: SD10, NUMA100 - diameters 254, 270, 279, 295, 305 mm
12 inch shanks: SD12, DHD1120, NUMA120, NUMA125 - diameters 305, 330, 343, 356, 368, 381 mm
15 inch shanks: DHD1150, SD15, NUMA125 - diameters 381, 391, 435, 457, 483, 503 mm
20 inch and above: NUMA180, NUMA240 - diameters 483, 508, 560, 578, 610, 660 mm
Body material: Nickel-alloy steel, forged, hardened, tempered and stress relieved
Face designs: Drop centre, concave, convex, double gauge, flat
Compatibility: Interchangeable with Sandvik SD, Ingersoll-Rand QL and DHD, Atlas Copco COP and Numa bits of the same shank
DETAILS
Large hole button bits carry far more impact energy than small bits, so the body has to be thick enough to resist bending and the button layout has to spread the blow over a wide face without leaving uncut rings. These SD10, SD12 and QL80 shank bits are forged from nickel-alloy steel, hardened and tempered, and stress relieved after button brazing, so the face holds its shape through long runs in water well and geothermal ground.
The gauge buttons are set slightly proud of the face and are the first to take wear, which keeps the hole to size as the face wears back. Flushing holes are placed to clear the wide face evenly, which matters most in large diameter water wells where cuttings volume per metre is high and a badly flushed face balls up quickly.
Bits are available for 10 inch SD10 and NUMA100 hammers, 12 inch SD12, DHD1120, NUMA120 and NUMA125 hammers, 15 inch DHD1150, SD15 and NUMA125 hammers, and 20 inch and larger NUMA180 and NUMA240 hammers, covering diameters from 254 mm to 660 mm.
| Specification of dth hammer button bits | Diameter: (mm) |
| DTH bitS | 1-2 inch low air pressure DTH BITS Shank: BR1, BR2, DHD2.5 | 57/64/70/76/80/82/90 |
| 3 inch high Air pressure DTH bits Shank: BR3,DHD3.5,COP34,COP32,QL30,M30,IR3.5 | 85 / 90 / 95 / 100 / 105/110 |
| 4 inch high Air pressure DTH bits Shank:DHD340,COP44,M40,SD4,QL40 | 105 / 110 / 115 / 120 / 127/130 |
| 5 inch high Air pressure DTH bits Shank:DHD350,COP54,M50,SD5,QL50 | 133 / 140 / 146 / 152 / 165 |
| 6 inch high Air pressure DTH bits Shank:DHD360,M60,SD6,QL60,COP64 | 152 / 165 / 178 / 190 / 203 |
| 8 inch high Air pressure DTH bits Shank:DHD380,COP84,M80,SD8,QL80 | 195 / 203 / 216 / 254 / 305 |
| 10 inch high Air pressure DTH bits Shank:SD10, NUMA100 | 254/270/279/295/305 |
| 12 inch high Air pressure DTH bits Shank:SD12,DHD1120,NUMA120,NUMA125 | 305/330/343/356/368/381 |
| 15 inch high Air pressure DTH bits Shank: DHD1150, SD15,NUMA125 | 381/391/435/457/483/503 |
| Over 20 inch high Air Pressure DTH bits Shank: NUMA180,NUMA240, | 483/508/560/578/610/660 |
APPLICATION
Water well and geothermal production holes, foundation and bridge piling, mining shaft and ventilation holes, quarry large diameter blast holes, and town water supply wells in sandstone, limestone, granite and weathered rock.
HOW TO ORDER
Please confirm the hammer model or shank type, the bit diameter in mm, the face design, the button type and the quantity. If you are matching an Atlas Copco, Ingersoll-Rand, Sandvik, Mincon, Halco or Numa hammer, send the hammer model so we can match the spline and the recommended bit diameter, and we will quote bits, hammers and spares together.
ADVANTAGES
• Button inserts brazed into a stress-relieved bit body, so buttons stay tight in hard rock
• Nickel-alloy steel forged body, hardened and tempered for wear resistance in abrasive ground
• Flushing holes sized to keep the cutting face clean and stop bit balling in wet holes
• Shank machined to the original hammer spline so the bit drops straight in
• Face designs available: drop centre, concave, convex, double gauge and flat
• Custom diameters, button layouts and OEM marking available on request