• QL50 146mm DTH hammer and button bits DHD360 90mm,Hubei Superdrill Mechanical Equipment Co.,Ltd
  • QL50 146mm DTH hammer and button bits DHD360 90mm,Hubei Superdrill Mechanical Equipment Co.,Ltd
  • QL50 146mm DTH hammer and button bits DHD360 90mm,Hubei Superdrill Mechanical Equipment Co.,Ltd
  • QL50 146mm DTH hammer and button bits DHD360 90mm,Hubei Superdrill Mechanical Equipment Co.,Ltd
  • QL50 146mm DTH hammer and button bits DHD360 90mm,Hubei Superdrill Mechanical Equipment Co.,Ltd
  • QL50 146mm DTH hammer and button bits DHD360 90mm,Hubei Superdrill Mechanical Equipment Co.,Ltd

QL50 146mm DTH hammer and button bits DHD360 90mm

Superdrill QL50 146mm DTH hammer and button bits DHD360 90mm is made from nickel-alloy steel with heat treatment and stress relief, so the body and buttons hold up in abrasive ground. The QL50 is the 5 inch class high pressure hammer, and the bit that goes with it is the 146 mm size in most quarry and mining work, with 133, 140, 152 and 165 mm available for tighter or wider hole requirements. Because the hammer runs on 10 to 24 bar, the bit face has to take a hard blow without chipping, so the body is forged from nickel-alloy steel and stress relieved after the buttons are brazed. It is interchangeable with the original hammer shank, so the bit drops straight into the hammer without adapters, and bits, hammers, rods and spare parts can be ordered from one source. Custom diameters, button layouts and OEM marking are available on request.
Description
QL50 146mm DTH hammer and button bits DHD360 90mm
SPECIFICATION
Product type: QL50 and DHD360 DTH hammer button bit
QL50 bit diameters: 133, 140, 146, 152, 165 mm (5 inch class)
DHD360 bit diameters: 90 mm and other 6 inch class sizes on request
QL50 shank: QL50, also DHD350, COP54, M50, SD5 family
DHD360 shank: DHD360, also M60, SD6, QL60, COP64 family
Face designs: Drop centre, concave, convex, double gauge, flat
Body material: Nickel-alloy steel, heat treated, stress relieved after button brazing
Air pressure: High pressure 7 to 30 bar, typically 10 to 24 bar for QL50
Compatibility: Interchangeable with Ingersoll-Rand QL and DHD, Atlas Copco COP, Sandvik SD, Mission and Numa bits
DETAILS
The QL50 is the 5 inch class high pressure hammer, and the bit that goes with it is the 146 mm size in most quarry and mining work, with 133, 140, 152 and 165 mm available for tighter or wider hole requirements. Because the hammer runs on 10 to 24 bar, the bit face has to take a hard blow without chipping, so the body is forged from nickel-alloy steel and stress relieved after the buttons are brazed.
DHD360 is the 6 inch Ingersoll-Rand class hammer, and the 90 mm bit listed here is the smaller diameter used where a 6 inch hammer has to drill a tighter hole, for example in blocky ground where a full 6 inch hole would spall. The same body and button standard applies, so both sizes can be ordered together and run on the same compressor.
Bits are interchangeable with Ingersoll-Rand QL40 to QL80 and DHD340 to DHD380, Atlas Copco COP44 to COP84, Sandvik SD4 to SD8, Mission60 and Numa100 bits of the same shank, and can be supplied with matching hammers, rods and spares from one order.
Specification of dth hammer button bitsDiameter: (mm)
 1-2 inch low air pressure DTH BITS Shank: BR1, BR2, DHD2.557/64/70/76/80/82/90
3 inch high Air pressure DTH bits Shank: BR3,DHD3.5,COP34,Cop32,QL30,M30,IR3.585 / 90 / 95 / 100 / 105/110
4 inch high Air pressure DTH bits Shank:DHD340,COP44,M40,SD4,QL40105 / 110 / 115 / 120 / 127/130
5 inch high Air pressure DTH bits Shank:DHD350,COP54,M50,SD5,QL50133 / 140 / 146 / 152 / 165
6 inch high Air pressure DTH bits Shank:DHD360,M60,SD6,QL60,COP64152 / 165 / 178 / 190 / 203
8 inch high Air pressure DTH bits Shank:DHD380,COP84,M80,SD8,QL80195 / 203 / 216 / 254 / 305
10 inch high Air pressure DTH bits Shank:SD10, NUMA100254/270/279/295/305
12 inch high Air pressure DTH bits Shank:SD12,DHD1120,NUMA120,NUMA125305/330/343/356/368/381
15 inch high Air pressure DTH bits Shank: DHD1150, SD15,NUMA125381/391/435/457/483/503
Over 20 inch high Air Pressure DTH bits Shank: NUMA180,NUMA240,483/508/560/578/610/660
APPLICATION
Quarry and open pit blast holes, mining production drilling, bench and trench drilling, water wells and construction work with 5 inch and 6 inch high pressure hammers.
HOW TO ORDER
Please confirm the hammer model or shank type, the bit diameter in mm, the face design, the button type and the quantity. If you are matching an Atlas Copco, Ingersoll-Rand, Sandvik, Mincon, Halco or Numa hammer, send the hammer model so we can match the spline and the recommended bit diameter, and we will quote bits, hammers and spares together.
ADVANTAGES
• Button inserts brazed into a stress-relieved bit body, so buttons stay tight in hard rock
• Nickel-alloy steel forged body, hardened and tempered for wear resistance in abrasive ground
• Flushing holes sized to keep the cutting face clean and stop bit balling in wet holes
• Shank machined to the original hammer spline so the bit drops straight in
• Face designs available: drop centre, concave, convex, double gauge and flat
• Custom diameters, button layouts and OEM marking available on request
  • QL50 146mm DTH hammer and button bits DHD360 90mm,Hubei Superdrill Mechanical Equipment Co.,Ltd
  • QL50 146mm DTH hammer and button bits DHD360 90mm,Hubei Superdrill Mechanical Equipment Co.,Ltd
  • QL50 146mm DTH hammer and button bits DHD360 90mm,Hubei Superdrill Mechanical Equipment Co.,Ltd

Download