DTH hole openers and DTH reaming bits
SPECIFICATION
Product type: DTH hole opener and DTH reaming bit
Reamed diameter: 130 mm to 444.5 mm (6 inch to 20 inch)
Guide diameter: 75 mm to 311 mm, matched to the pilot bit and hammer
Hammer sizes: 3.5 inch (DHD3.5), 5 inch (DHD350R), 6 inch (DHD360), 8 inch (DHD380), 12 inch (DHD112)
Weight: 8.5 kg to 328.5 kg depending on reamed diameter
Cutter layouts: 6×14+4×11+3×11, 8×14, 9×16, 8×18, 10×16, 10×18, 18×18, 18×19, 22×18
Body material: Nickel-alloy steel body with tungsten carbide button cutters
Customisation: Pilot diameter, reamed diameter, cutter count and shank matched to the customer hammer
DETAILS
A DTH hole opener, also called a reaming bit, opens an existing pilot hole to final diameter without pulling the drill string. The guide section runs inside the pilot hole and centres the tool, while the cutters on the outer body enlarge the hole to the reamed diameter. Because the hammer keeps working through the tool, the hole is opened at the same penetration rate class as the pilot hole and no second pass with a larger hammer is needed.
The cutters are tungsten carbide buttons brazed into a nickel-alloy body, and the layout is chosen for the rock: harder and more abrasive ground gets more gauge cutters and heavier button counts, softer ground gets fewer cutters with larger buttons so the tool does not over-break the wall. Guide diameter is matched to the pilot bit so the tool does not chatter, and the shank is machined to the hammer spline so the opener threads onto the same hammer that drilled the pilot hole.
These tools are used for oil and gas, geothermal, water well, construction, directional drilling and mining, where a small pilot hole is drilled first and then opened up to the final casing or completion diameter.
| Hammer Size | Shank | Guide Dia. | Reamed Dia. | Weight (kg) | Remarks |
| For 3.5″ hammer | DHD3.5 | 95 | 130 | 8.5 | 6×14+4×11+3×11 |
| | DHD3.5 | 80 | 165 | 15.1 | 8×14 |
| | DHD3.5 | 100 | 165 | 14.5 | 8×14 |
| | DHD3.5 | 115 | 171.5 | 16.1 | 9×16 |
| For 5″ hammer | DHD350R | 75 | 152 | 35.2 | 8×18 |
| For 6″ hammer | DHD360 | 165 | 191 | 74.5 | 10×16 |
| | DHD360 | 108 | 220 | 79.3 | 10×18 |
| For 8″ hammer | DHD380 | 140 | 200 | 10.6 | 10×18 |
| | DHD380 | 188 | 254 | 147.4 | 22×18 |
| For 12″ hammer | DHD112 | 216 | 312 | 133.6 | 18×18 |
| | DHD112 | 254 | 375 | 136.2 | 18×18 |
| | DHD112 | 311 | 444.5 | 328.5 | 18×19 |
APPLICATION
Water well and geothermal casing holes, oil and gas surface holes, foundation and pile holes, mining ventilation and drainage holes, directional and horizontal drilling, and any job where a pilot hole is opened to final diameter without a second hammer.
HOW TO ORDER
Please confirm the hammer model or shank type, the bit diameter in mm, the face design, the button type and the quantity. If you are matching an Atlas Copco, Ingersoll-Rand, Sandvik, Mincon, Halco or Numa hammer, send the hammer model so we can match the spline and the recommended bit diameter, and we will quote bits, hammers and spares together.
ADVANTAGES
• Button inserts brazed into a stress-relieved bit body, so buttons stay tight in hard rock
• Nickel-alloy steel forged body, hardened and tempered for wear resistance in abrasive ground
• Flushing holes sized to keep the cutting face clean and stop bit balling in wet holes
• Shank machined to the original hammer spline so the bit drops straight in
• Face designs available: drop centre, concave, convex, double gauge and flat
• Custom diameters, button layouts and OEM marking available on request