COP32 BR3 COP34 3 inch DTH drill button bits series
SPECIFICATION
Product type: 3 inch class DTH drill button bit series
Diameter range: 85, 90, 95, 100, 105, 110 mm
Shank coverage: COP32, COP34, BR3, DHD3.5, QL30, M30, IR3.5
Face designs: Drop centre, concave, convex, double gauge, flat
Insert type: Spherical and semi-ballistic tungsten carbide buttons
Body material: Nickel-alloy steel, forged, hardened, tempered, stress relieved
Compatibility: Interchangeable with Atlas Copco COP32 and COP34, Ingersoll-Rand DHD3.5, Sandvik SD4 and Mission bits
Quality control: Gauge, spline and button pull check before shipment
DETAILS
The 3 inch class is the most crowded shank market: Atlas Copco COP32 and COP34, Ingersoll-Rand BR3 and DHD3.5, QL30, M30 and IR3.5 all drill roughly the same hole size but with different splines and different bit lengths. This series covers all of them at 85 to 110 mm, so a fleet running mixed small hammers can order one bit series and keep the same face design and button standard across the fleet.
Bits are produced from premium quality nickel-alloy steel for durability and wear resistance, with specific heat treatment standards and a stress relief process so performance stays consistent from bit to bit. The face is designed for maximum hole cleaning ability and penetration rate, with gauge buttons holding the diameter and flushing holes clearing the face.
Because the shank is machined to the original spline, the bit is interchangeable with Atlas Copco COP32, COP34, COP44 and COP54 bits, Ingersoll-Rand DHD3.5, DHD3.5HD and DHD340A bits, Sandvik SD4 bits, QL30 bits, and the same series covers the QL40 to QL80 and Numa range on request.
| Specification of dth hammer button bits | Diameter: (mm) |
| DTH bitS | 1-2 inch low air pressure DTH BITS Shank: BR1, BR2, DHD2.5 | 57/64/70/76/80/82/90 |
| 3 inch high Air pressure DTH bits Shank: BR3,DHD3.5,COP34,COP32,QL30,M30,IR3.5 | 85 / 90 / 95 / 100 / 105/110 |
| 4 inch high Air pressure DTH bits Shank:DHD340,COP44,M40,SD4,QL40 | 105 / 110 / 115 / 120 / 127/130 |
| 5 inch high Air pressure DTH bits Shank:DHD350,COP54,M50,SD5,QL50 | 133 / 140 / 146 / 152 / 165 |
| 6 inch high Air pressure DTH bits Shank:DHD360,M60,SD6,QL60,COP64 | 152 / 165 / 178 / 190 / 203 |
| 8 inch high Air pressure DTH bits Shank:DHD380,COP84,M80,SD8,QL80 | 195 / 203 / 216 / 254 / 305 |
| 10 inch high Air pressure DTH bits Shank:SD10, NUMA100 | 254/270/279/295/305 |
| 12 inch high Air pressure DTH bits Shank:SD12,DHD1120,NUMA120,NUMA125 | 305/330/343/356/368/381 |
| 15 inch high Air pressure DTH bits Shank: DHD1150, SD15,NUMA125 | 381/391/435/457/483/503 |
| Over 20 inch high Air Pressure DTH bits Shank: NUMA180,NUMA240, | 483/508/560/578/610/660 |
APPLICATION
Quarry and construction blast holes, foundation and anchor drilling, water well start holes, utility and trenchless work, and general 3 inch DTH drilling in limestone, granite, sandstone and concrete.
HOW TO ORDER
Please confirm the hammer model or shank type, the bit diameter in mm, the face design, the button type and the quantity. If you are matching an Atlas Copco, Ingersoll-Rand, Sandvik, Mincon, Halco or Numa hammer, send the hammer model so we can match the spline and the recommended bit diameter, and we will quote bits, hammers and spares together.
ADVANTAGES
• Button inserts brazed into a stress-relieved bit body, so buttons stay tight in hard rock
• Nickel-alloy steel forged body, hardened and tempered for wear resistance in abrasive ground
• Flushing holes sized to keep the cutting face clean and stop bit balling in wet holes
• Shank machined to the original hammer spline so the bit drops straight in
• Face designs available: drop centre, concave, convex, double gauge and flat
• Custom diameters, button layouts and OEM marking available on request