6 inch Numa DTH hammer
SPECIFICATION
Product type: DTH hammer (down-the-hole hammer)
Hammer size: 6 inch
Brand compatibility: Numa shank design
Model options: DCS6, DCS6HD, Patriot 60W, Patriot 60WQ, Challenger 6
Backhead Connection: 3 1⁄2 API Reg Pin, 3 1⁄2 API Reg Pin, 3 1⁄2 API Reg Pin, 3 1⁄2 API Reg Pin
Blows/Min @ psi: 1850 @ 350, 1850 @ 350, 1800 @ 350, 1800 @ 350
Quality control: Hydrostatic and function test before shipment, spare parts matched to the shank design
Customization: OEM marking, custom packing and matched bit supply available
DETAILS
The 6 inch Numa DTH hammer drills 6 inch class holes with a valveless air cycle, so the piston works with a short simple air path and there are few wearing parts to service. It is used with a matched Numa shank bit and standard API backhead thread, which lets the hammer run on most top drive heads and rotation units.
Numa Patriot, Champion and Challenger hammers cover hole sizes from 3 1/2 inch to 43 inch and are widely used for water well, geothermal and large diameter foundation drilling. Superdrill supplies matched Numa shank hammers and spares.
Models in this range: DCS6, DCS6HD, Patriot 60W, Patriot 60WQ, Challenger 6. Each model keeps the same shank family and backhead thread, so bits, adapters and spare parts stay interchangeable across the series.
Air consumption rises with working pressure, so the compressor must be sized for the highest pressure the hammer will run at. Running below the recommended pressure reduces impact energy and slows penetration, while running far above it shortens piston and bit life. Check the air consumption figures in the table against the compressor output at the actual working altitude before choosing a model.
| Hammer | DCS6 | DCS6HD | Patriot 60W | Patriot 60WQ |
| Bit Shank | QL60 | QL60 | 360 | QL60 |
| Recommended Bit Size (inches) | 6 - 81⁄2" | 61⁄4 - 81⁄2" | 6 - 81⁄2" | 6 - 81⁄2" |
| Outside Diameter (inches) | 51⁄2" | 5 3⁄4" | 5 1⁄2" | 5 1⁄2" |
| Hammer Weight (pounds) | 182 | 203 | 204 | 192 |
| Hammer Length Shoulder to Shoulder (inches) | 38 7⁄8" | 38 7⁄8" | 43 3⁄16" | 41 3⁄16" |
| Backhead Connection | 3 1⁄2 API Reg Pin | 3 1⁄2 API Reg Pin | 3 1⁄2 API Reg Pin | 3 1⁄2 API Reg Pin |
| Blows/Min @ psi | 1850 @ 350 | 1850 @ 350 | 1800 @ 350 | 1800 @ 350 |
| Hammer | Challenger 6 |
| Bit Shank | 360 |
| Recommended Bit Size (inches) | 6 - 81⁄2" |
| Outside Diameter (inches) | 5 3⁄8" |
| Hammer Weight (pounds) | 258 |
| Hammer Length Shoulder to Shoulder (inches) | 52" |
| Backhead Connection | 3 1⁄2 API Reg Pin |
| Blows/Min @ psi | 1350 @ 350 |
APPLICATION
Quarry and open pit blast hole drilling, mining production drilling, water well and geothermal drilling, foundation and anchor piling, construction and road building, and general down-the-hole drilling where a Numa shank hammer is used.
HOW TO ORDER
Please confirm the hammer model or hole diameter, the shank type, backhead thread, compressor output and working pressure, plus the quantity of hammers and matched bits. Tell us the rock type and hole depth so we can recommend the right model, and we will quote hammers, bits, adapters and spare parts together.
ADVANTAGES
• Simple valveless air cycle with few wearing parts
• Matched shank and backhead thread for direct replacement
• Hardened piston and cylinder for long service life
• Stable impact energy at the recommended working pressure
• Bits, adapters and spare parts supplied from the same source
• OEM marking and custom packing available on request